Questions asked in SSC JE 2015 Exam (Design of steel structures)

Please share with your friends and subscribe this blog by e-mail to get notification.

Up coming soon- SSC JE previous years paper from 2001 to 2019

2015

1. When a load is exerted or transferred from one surface to another in contact, the stress is known as?

a) Bearing stress

b) binding stress

c) Shear stress

d) direct stress

2. The steel beam of light section placed in plain cement concrete are called.

a) Joists

b) concrete joists

c) filler joists

d) simple joists

3. The actual thickness of a butt weld when compared with the thickness of the plate is?

a) less

b) more or less

c) more

d) equal

4. The fillet weld whose axis is parallel to the direction of the applied load is known as.

a) End fillet weld

b) Diagonal fillet weld

c) maximum of the all rounded to nearest 5 mm

d) equal to normal rivet diameter

5. The width of having bars in mm is kept?

a) Twice the nominal rivet diameter

b) Thrice the nominal rivet diameter

c) Maximum of the all rounded to nearest 5 mm

d) Equal to normal rivet diameter

6. The minimum thickness of the plates used in pressed steel tanks is.

a) 5 mm

b) 4 mm

c) 3 mm

d) 4 mm

7. Tacking rivets in compression plates exposed to weather have a pitch not exceeding 200 mm or?

a) 8 times the thickness of outside plate

b) 16 times the thickness of outside plate

c) 32 times the thickness of outside plate

d) times the thickness of outside plate

8. The total length of a cranked bar through a distance (D) at 450 in case of a beam of effective length L and depth (D) is?

a) L + 0.42d

b) L + 2 × 0.42d

c) L - 0.42 d

d) L – 2 × 0.42d

9. A column is known as medium size if its slenderness ration is between?

a) 32 and 120

b) 160 and 180

c) 20 and 32

d) 120 and 160